Daily: £70.00

Weekly: £140.00


Mark Bass SD800 amp head
The Markbass SD800 amp head is perfect for the times when you need speed and clarity at high volumes, especially in big-stage applications. This digital power amp delivers 750W of power into a 4 ohm cab or 450W into an 8 ohm cab. Recommended for use with big cabinets (4×10, 6X10, 8X10, or 2X15), or two-cabinet rigs, this little solid-state head gives you plenty of headroom and has several options for protecting and shaping your sound, from its VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) options to the Pre/Post EQ setting which allows you to choose whether your line out signal is affected by the amp’s EQ. The SD800 Head has an input jack that can be used with either active or passive basses as well as dual Neutrik Speakon Combo jacks so you can connect to one or two speaker cabs using 1/4″ speaker cables or Speakon cables.


The power/weight ratio of this model has been much improved and the results are nothing short of outstanding. From only 98 lbs of cabinet you get 1200W of power! The 106HF includes a 1″ HF compression driver with a custom horn for top-quality high frequency reproduction. This cab is specially designed for professional live applications where substantial volume is needed.


Features & Specifications – MARK BASS SD800 Amp Head

  • Solid state digital power preamp
  • Delivers 750W of power into a 4 ohm cab, 450W into an 8 ohm cab
  • 1/4″ input jack works with active or passive basses
  • Gain and master knobs
  • XLR line out
  • Vintage Loudspeaker Emulator filters out high frequencies
  • Variable Pre-shape Filter boosts lows (around 35Hz and highs (around 10kHz), and cuts mids at 380Hz
  • Dual Neutrik Speakon Combo jacks allows it to be connected to one or two speaker cabs using 1/4″ speaker cables or Speakon cables
  • Two balanced XLR output
  • Pre/Post EQ switch to determine whether signal is affected by EQ settings or not
  • Ground lift button for eliminating hum from grounding problems
  • Unbalanced tuner out lets you tune as you play without passing your signal through your pedals
  • Send Effect and Return Effect means you won’t lose signal if something in your effects chain dies while playing

Features & Specifications – MARK BASS STANDARD 106 HF BASS CABINET

  • 6 ohms impedance
  • 6 x 10” Speakers
  • Front bass ports
  • 1″ compression driver with custom horn
  • 1200W RMS (AES Standard) power handling
  • 3.5 kHz Crossover frequency
  • 45 Hz to 20 kHz frequency response

Weight & Dimensions

  • WEIGHT: 98.3 lbs
  • WIDTH: 23.4”
  • HEIGHT: 45.4”
  • DEPTH: 9”